Search the documentation
Enter at least 2 characters
 |
CAE Fidesys 9.0 Documentation |
Enter at least 2 characters
|
CAE Fidesys 9.0 Documentation |
The fields of static strength calculation output are configured from the Command Panel by selecting (Mode - Calculation Settings, Calculation Settings - Static, Static - Output Fields).
Fig. 1 - Command panel, output field settings for static calculation
To display nodal forces or reactions as results, select the checkbox Calculate nodal forces and forces reactions.
Checkbox Output intermediate results in the case of solving a nonlinear problem, it provides a display of the parameters of the stress-strain state at each loading step.
The checkbox 3D recording allows you to display the analyzed object with a spatial representation of the calculation results, it may be necessary for calculations using beam or shell elements. However, enabling this option significantly increases the calculation time and requires more RAM than the calculation without specifying this option, what to consider when working with large models.
Click Apply.
Click Start Calculation.