Search the documentation
Enter at least 2 characters
 |
CAE Fidesys 9.0 Documentation |
Enter at least 2 characters
|
CAE Fidesys 9.0 Documentation |
Fidesys has been designed as a serial application, using a single CPU to generate its meshes. In some cases, where memory or time constraints are critical, parallel meshing may be necessary. Fidesys currently provides a separate application designed to run in parallel either on a desktop or on massively parallel cluster machines. In these cases, Fidesys can be used as a pre-processor to manipulate geometry and set up for meshing, however the actual meshing procedure is performed as a separate process or on another machine.
Sculpt is the separate process mentioned.